● Standard 1GB DDR3 (optional for 1GB/2GB DDR3) and 8GB eMMC memory
● AXP228 power management chip. With the characters of stable, reliable and low power consumption, far more better than NXE2000
● On-board wired Ethernet, experience fast speed
● Support 4G, WiFi, GPS, Bluetooth, G-Sensor, Camera and other modules
- Detail
- Parameter
- Downloads
- Video
Introduction：
CES-6818 development platform is a high-performance,low-power consumption embedded ARM motherboard,using Samsung''''''''s high-end mainstream ARM processor S5P6818, 64-bit Cortex-A53 octa-core CPU, frequency at 1.4 ~ 1.6 GHz. With 2 * 512KByte L2 cache, 28nm production process, equipped with Mali-400GPU, this platform has the features of high memory bandwidth, full HD display, 1080P hardware codec, high-speed interface, etc.
CES-6818 development platform is comprised of SOC module, base-plate, display driver board and development aids. SOC module integrates the key components such as S5P6818 processor, memory unit, EMMC storage unit, PMU power management unit and Gigabit Ethernet which can be used on target products directly so as to save both the development time and cost. Base-plate consists of functional units and expansion modules. The functional units include the commonly used UART serial data ports, universal serial data ports of USB master/slave devices, communication interfaces of I2C/ I2S/SPI, HDMI 1.4 HD output display, MIPI-DSI interface, LVDS and RGB dual display control interface, GPIO input and output functions. The expansion modules include the application-type functional modules such as 4Gmodule, WIFI module, Bluetooth module, camera module, GPS module and G-Sensor module.
CES-6818 development platform is equipped with a 10.1-inch capacitive touch LCD display, providing a complete development kit and software package. Rich resources and optimized software and hardware could meet the needs of most products.
Features
● Samsung high-end mainstream ARM S5P6818 Cortex-A53 octa-core processor , the main frequency is 1.4~1.6GHz
● Standard 1GB DDR3 (optional for 1GB/2GB DDR3) and 8GB eMMC memory
● AXP228 power management chip. With the characters of stable, reliable and low power consumption, far more better than NXE2000
● On-board wired Ethernet, experience fast speed
● Support 4G, WiFi, GPS, Bluetooth, G-Sensor, Camera and other modules
Hardware Parameters
|
CPU |
Samsung Cortex-A53 S5P6818, 64-bit octa-core processor with a main frequency of 1.4 to 1.6 GHz, 2*512KB L2 cache |
|
GPU |
ARM Mail-400MP |
|
Frequency |
POWERVR SGX530，Industry-standard API support |
|
Memory |
Standard 1GB DDR3, 800MHz, optional for 1GB or 2GB DDR3 |
|
eMMC |
8GB eMMC |
|
PMIC |
AXP228 |
|
4G Module |
MiNi PCIE interface with SIM card slot |
|
WiFi/Bluetooth |
Support 802.11b/g/n full format and Bluetooth communication |
|
GPS |
Tracking sensitivity -165dBm, capture sensitivity -148dBm |
|
Camera Interface |
On-board 1 channel 24pin camera interface |
|
USB 2.0 HOST |
On-board 4*USB Host2.0 host interface |
|
USB OTG |
On-board 1* USB OTG2.0 slave interface |
|
SD/HSMMC |
On-board 2*SDIO 2.0, draw out 1* SD/MMC card slot |
|
UART Interface |
On-board 4* COM0-COM4 UART serial ports, baud rate is 115200bps, used for GPS communication, common serial port,debugging information output, etc. |
|
HDMI Interface |
On-board 1* HDMI 1.4 (1080P/60Hz) HD interface |
|
Video Output Interface |
On-board 1*CVBS video output interface |
|
Ethernet Port |
On-board 1* Gigabit LAN slot, using RTL8211E Gigabit Ethernet PHY network chip |
|
Audio Unit |
ES8316/IIS interface, support for recording and broadcasting |
|
Acceleration Sensor |
On-board acceleration sensor 3-axis 2g/4g/8g 10bit, I2C interface |
|
Function Buttons |
Including power button, reset button, interrupt button, etc. |
|
Infrared Sensor |
IRDA serial communication |
|
Buzzer |
On-board 1*MMBT3904/SOT buzzer |
|
Battery |
On-board 1*button lithium battery for RTC using |
|
Power |
12V/5A DC power supply with power switch and indicator |
|
Other Expansion Interfaces |
MIPI DSI and LCD (RGB) which can be used to extract the signals required by the use |
Software Parameters—Android5.1.1 Lollipop
|
OS |
Android 5.1.1 Lollipop |
|
Linux kernel |
Linux 3.4.39 |
|
System Boot Program |
U-boot 2014.07 |
|
Serial Debugging Tool |
Minicom terminal |
|
Cross Compilation Tool |
arm-eabi-4.8(gcc4.8) |
|
File System Format |
Ext4 |
|
GUI |
Android 5.1.1 Lollipop |
|
4G |
To achieve 4G Internet access and receive/send information |
|
Wireless WiFi |
Support 802.11b/g/n wireless protocol for WiFi wireless Internet access |
|
BT |
Support Bluedroid Bluetooth protocol stack for Bluetooth data communication |
|
GPS |
Enables acquisition and reception of positioning data |
|
G-sensor |
Support system interface rotation function |
|
CMOS Camera |
With image preview, photo and video functions |
|
Network Port Module Driver |
Gigabit wired Ethernet |
|
HDMI Driver |
Support HDMI audio and video output |
|
Audio Driver |
Implement audio playback |
|
LCD Display Driver |
Supports 10.1" LCD display and backlight adjustment |
|
Touch Driver |
Support capacitive multi-point touch driver |
|
USB HOST Driver |
Support the read function of USB mouse, USB keyboard, U disk |
|
USB OTG Driver |
Support for ADB and MTP functions |
|
Keypad Driver |
Support 4 GPIO keypad functions |
|
SD/MMC Driver |
Supports 32GB SD card memory’s read and write operations |
|
RTC Driver |
Support |
|
UART Driver |
Support debugging and communication serial port functions |
|
MFC Codec Driver |
Supports codec functions of H.264, MPEG4, H.263, and MJPEG |
|
PPM Driver |
Support infrared receiving function |
|
BEEP Driver |
Support buzzer control function |
|
LED Indicator Driver |
Support indicator control function |
|
ADC Driver |
Supports codec functions of H.264, MPEG4, H.263, and MJPEG |
|
USB Camera Driver |
Support USB camera’s preview and photo function |
Software Parameters——Linux3.4
|
OS |
Linux3.4 |
|
Linux kernel |
Linux 3.4.39 |
|
System Boot Program |
U-boot 2014.07 |
|
Serial Debugging Tool |
Minicom terminal |
|
Cross Compilation Tool |
arm-eabi-4.8(gcc4.8) |
|
File System Format |
Ext4 |
|
GUI |
QT5.5 |
|
Video Player |
MPlayer |
|
Wireless WiFi |
Support 802.11b/g/n wireless protocol for WiFi wireless Internet access |
|
Network Port Module Driver |
Gigabit wired Ethernet |
|
Audio Driver |
Implement audio playback |
|
LCD Display Driver |
Supports 10.1-inch LCD display and backlight adjustment |
|
Touch Driver |
Support capacitive multi-point touch driver |
|
USB HOST Driver |
Support the read function of USB mouse, USB keyboard, U disk |
|
USB OTG Driver |
Support for ADB and MTP functions |
|
Keypad Driver |
Support 4 GPIO button functions |
|
SD/MMC Driver |
Supports 32GB SD card memory’s read and write operations |
|
RTC Driver |
Support |
|
UART Driver |
Support debugging and communication serial port functions |
|
MFC Codec Driver |
Supports codec functions of H.264, MPEG4, H.263, and MJPEG |
|
PPM Driver |
Support infrared receiving function |
|
BEEP Driver |
Support buzzer control function |
|
LED Indicator Driver |
Support indicator control function |
|
ADC Driver |
Supports codec functions of H.264, MPEG4, H.263, MJPEG |
|
USB Camera Driver |
Support USB camera’s preview and photo function |
Software Parameters——Ubuntu12.04
|
OS |
Ubuntu12.04 |
|
Linux kernel |
Linux 3.4.39 |
|
System Boot Program |
U-boot 2014.07 |
|
Serial Debugging Tool |
Minicom terminal |
|
Cross Compilation Tool |
arm-eabi-4.8(gcc4.8) |
|
File System Format |
Ext4 |
|
GUI |
QT5.5 |
|
Video Player |
Movie Player |
|
Music Player |
Rhythmbox |
|
Wireless WiFi |
Support 802.11b/g/n wireless protocol for WiFi wireless Internet access |
|
Network Port Module Driver |
Gigabit wired Ethernet |
|
Audio Driver |
Implement audio playback |
|
LCD Display Driver |
Support 10.1" LCD display |
|
Touch Driver |
Support |
|
USB HOST Driver |
Support the read function of USB mouse, USB keyboard, U disk |
|
Keypad Driver |
Support 4 GPIO button functions |
|
SD/MMC Driver |
Supports 32GB SD card memory’s read and write operations |
|
RTC Driver |
Support |
|
UART Driver |
Support debugging and communication serial port functions |
|
USB Camera Driver |
Support USB camera’s preview and photo function |
