Introduction
DJ-i.MX 8M Mini is an ARM 3.5” industrial Motherboard based on NXP i.MX 8M Mini 4x Arm® Cortex®-A53 and 1x Arm® Cortex®-M4 processor, frequency at1.8GHz, on-chip 3D/2D GPU and 1080p VPU, support for OpenGL2.0, it offers rich interface such as Gbit Ethernet, 6 USB2.0, 4 UART, 15 GPIOs, MIPI / LVDS also features Mini-PCIe,M.2, SIM card slots for integrating Wi-Fi, Bluetooth and 3G/4G modules.
It ideal for Industrial Automation, Smart Embedded Device, Self-service terminal, IoT application, Energy, Medical Device, Building automation, Digital Signage and much more.
Features
● ARM 3.5-inch industrial motherboard with a lead-times up to 10 years
● NXP i.MX8M Mini 4x Arm® Cortex®-A53 and 1x Arm® Cortex®-M4 core 400MHz processor
● Onboard 2GB DDR4 Memory and 8GB/16GB eMMC
● Dual Channel 30/24/18 bit LVDS, 1x MIPI-CSI
● 6x USB2.0,5x UART,1x GbE Lan, 1x TF Card Slot, 1x M.2, 15 GPIO, MIC-in, Line-out, 1x Speaker
● Onboard WiFi/BT modules, mini-PCIE for 4G optional with SIM slot
● Support Linux and Android9.0
CPU |
NXP®i.MX8M Mini 4x Arm® Cortex®-A53 and 1x Arm® Cortex®-M4 core |
OS |
Linux, Android |
GPU |
3D (1x shader, OpenGL® ES 2.0) and 1080p VPU |
Memory |
Onboard 2GB DDR4 |
Storage |
Onboard 16GB(Commercial) or 8GB(Industrial) Emmc5.1 |
Flash |
32MB of QSPI Flash |
M.2 |
1x M.2 PCIe slot, Support 256G/512G/1BT SSD SATA |
Ethernet |
1x RJ45 LAN, 10/100/1000Mbps 1x Mini PCIe slot with SIM Card Slot, support 3G/4G Onboard Wi-Fi/BT Module, support 802.11 a/b/g/n/ac and BT4.1 |
Display |
1x 30/24/18-bit LVDS with 1920*1080 for dual channels at 60Hz(30Pin header) 1x Backlight 5V / 12V voltage selection for LVDS(Jumper) 1x I2C Touch screen signal, also support touch screen of USB interface 1x Dual 4 Lane MIPI DSI (50Pin header) |
USB |
2x USB2.0 Type A 1x USB2.0 OTG Micro USB slot 4x USB2.0 Pin header |
UART |
2x 4-wire RS232/TTL, Pin header(UART2 for debugging) 2x RS232/TTL(default RS232 Type) 2x TTL/RS232(default TTL Type) 1x RS485, multiplexing with UART3 |
Audio |
1x 3.5mm Head phone slot 1x MIC IN pin header 1x Speaker interface (4Pin header) With power amplifier circuit |
Onboard I/O |
1x TF Card slot 1x MIPI CSI(4 Lanes 30Pin header) 15x GPIO via pin header 1x Buttons (Reset/Power/CPU Power buttons) 2x LEDs (red, blue) 1x IR circuit, support infrared remote control |
RTC |
Support |
Sleep/Wake up |
Support |
Power Supply |
DC-in 12V 1x DC-in JACK 1x 4PIN Header |
Environment |
Operating Temperature: 0℃ ~ 70℃ / -40℃ ~85℃ Operating Humidity: 10%~95%RH@31℃, no condensation Storage Temperature: -40℃~ -125℃ / Storage Humidity: 5%~95%RH@39℃, no condensation |
Size |
146 x 102mm |